A world first: the Walther KK500
The new KK500 is a significant high-end extension of Walther’s KK300 range of small-bore rifles. With its special technical features, high shooting precision, new trigger and ergonomic stock it is designed primarily for shooters who compete at the national and international level.
System | Bolt action, right/left system |
---|---|
Caliber | .22 l.r. |
Magazine capacity | 1 shot(s) |
Stock | Aluminium stock carrier |
Grip | left M |
Trigger | "E" elektronic Two-stage trigger |
Trigger Weight | 30-130 g |
Sights | Match rear sight and Centra foresight holder |
Sight length | 640-880 mm |
Barrel length | 690 mm |
Dimensions (L/H/W) | 1120-1140/215-235/80 mm |
Weight | 6000 g |
WALTHER KK500:
• World first, protected by patent: bolt handle and cartridge ejection can be switched without tools for right- or left-handed operation
- Many exclusive technical features:
- Receiver located far back and deep in the stock short bolt and breech permit easy reloading from the firing position
- 6 o'clock firing pin location for optimum ignition
- Weight-optimized firing pin for minimum action time (lock time)
- Cocking cam optimized for easy bolt closing and locking
- Innovative surface coating for low-friction movement and smooth bolt action
- Three locking lugs
- One piece receiver with integral full-length sight dovetail
- 3D grip in three sizes and two geometries
- Very short, raised butt stock area, suitable for both short and tall shooters
- Parallel linkage for adjustment of butt stock cast
- Shallow fore-end directly below the barrel axis for maximum stability, especially in prone position
- Innovative EXPERT butt plate
- Entire butt stock can be replaced by manually loosening a single clamping screw
- ALL-IN-ONE cheek piece, ambidextrous (angle - edge - radius)
- Fine adjustment for cheek piece and quick-change feature
- Ball-bearing-mounted match trigger including trigger stop, for two-stage or single-stage operation
- Minimum distance between finger and barrel axis
-High-precision, durablematch barrel made of alloy steel in various lengths and weights
- Tension-free, vibration-damped mounting of barrel on acrylate coating in receiver
- Excellent shooting performance
• Developed in collaboration with Henri Junghänel, ISSF Shooter of the Year, 2013
• Choice of Alutec or advanced Anatomic stock
• Choice of mechanical or electronic trigger
• Including MEC hand stop, Centra sight risers, INSIGHT-OUT rear sight, Centra foresight holder and gun case
Item No. 2810328